Kangen Water SpecialistKWS · Subang Jaya

Home / How to clean a Kangen Water machine

How to clean a Kangen Water machine

Three simple routines keep the plates clean and your water at its best.

A Leveluk machine rinses its plates automatically. Two more routines keep it at its best: E-Cleaning with Enagic’s citric-acid cleaning powder every few weeks, and a deep clean about once a year. KWS does both across the Klang Valley.

The three levels of cleaning

RoutineWhat it doesHow often
Automatic cleaningThe machine rinses the plates by itselfBuilt in
E-CleaningCitric-acid powder dissolves mineral scaleEvery few weeks, more often with hard water
Deep cleaningCitric-acid solution is circulated through the machine with a pumpAbout once a year

Signs your machine needs cleaning

E-Cleaning in brief

  1. Swap the filter for the cleaning cartridge filled with E-Cleaning powder.
  2. Start the cleaning mode and let it run and soak as your model’s manual describes.
  3. Rinse, then refit the filter.

Enagic Malaysia sells E-Cleaning powder at RM129 for 24 packs. Always follow the manual for your model.

Deep cleaning by KWS

We bring the pump and citric acid, circulate the solution for 30 to 60 minutes, rinse the machine and check the pH before we leave.

Book a cleaning

Common questions

How often should a Kangen Water machine be cleaned?

Run E-Cleaning every few weeks, more often in hard-water areas, and have a deep clean about once a year.

What is E-Cleaning?

A cleaning cycle that runs Enagic’s citric-acid powder through the machine to dissolve mineral scale on the plates.

Do you clean machines bought elsewhere?

Yes. We clean and service any Enagic machine in the Klang Valley.

Sources

  1. Enagic Malaysia — deep cleaning guide (PDF)
  2. Enagic Malaysia web shop — machine prices and specifications
WhatsApp